kdenlive/dev-docs/build.md

Building Kdenlive

Supported platforms

Kdenlive is primarily developed on GNU/Linux, but it is also possible to build Kdenlive on Microsoft Windows and macOS using Craft. For Windows also other possibilities exist.

Currently supported GNU/Linux distributions are:

• Ubuntu 24.10 Oracular Oriolea and derivatives, or later.
• Arch Linux

But it should work on any platforms fulfilling the requirements described below

The minimum required dependencies are:

• Qt >= 6.6.0 (Kdenlive dropped Qt5 support with version 24.12)
• KDE frameworks 6 (KF6) >= 6.3,
• MLT >= 7.28.0.

Building on Linux

Kdenlive usually requires the latest version of MLT, in which go several API updates, bugfixes and optimizations. So, except if your distribution ships a very recent version of MLT, you'll have to build MLT alongside kdenlive.

It is recommended to uninstall the official kdenlive packages to avoid potential conflicts.

# Debian/Ubuntu
sudo apt remove kdenlive kdenlive-data

# Arch Linux
sudo pacman -R kdenlive

Get the build dependencies

First, make sure you have the required tooling installed:

# Debian/Ubuntu
sudo apt install build-essential git cmake extra-cmake-modules libsm-dev clang-format
# For faster builds install Ninja
sudo apt install ninja-build

# Arch Linux
sudo pacman -S base-devel git cmake extra-cmake-modules libx11
# Optional for faster builds install Ninja
sudo pacman -S ninja

You can use your distribution packages information (if not too old) to easily get a complete build environment:

# Debian/Ubuntu -- Enable deb-src entries /etc/apt/sources beforehand
sudo apt build-dep mlt kdenlive
# Arch Linux -- Install expac beforehand
sudo pacman -S $(expac -S "%D" mlt) $(expac -S "%D" kdenlive)
# Fedora/CentOS -- Install builddep beforehand
dnf builddep mlt kdenlive
# OpenSUSE
zypper source-install --build-deps-only mlt kdenlive

Or install the dependencies explicitly:

# Qt6 modules
sudo apt install qt6-base-dev qt6-svg-dev qt6-multimedia-dev qt6-networkauth-dev \
qml6-module-qtqml-workerscript qml6-module-qtquick-window qml6-module-org-kde-desktop \
qt6-declarative-private-dev

# KDE Frameworks 6, based on Qt6
sudo apt install kf6-breeze-icon-theme libkf6archive-dev libkf6bookmarks-dev \
libkf6codecs-dev libkf6config-dev libkf6configwidgets-dev libkf6coreaddons-dev \
libkf6crash-dev libkf6dbusaddons-dev libkf6doctools-dev libkf6filemetadata-dev \
libkf6guiaddons-dev libkf6iconthemes-dev libkf6kio-dev libkf6newstuff-dev \
libkf6notifications-dev libkf6notifyconfig-dev libkf6purpose-dev \
libkf6solid-dev libkf6textwidgets-dev libkf6widgetsaddons-dev libkf6xmlgui-dev

# KDE Style Breeze
sudo apt install kde-style-breeze

# Multimedia stack
sudo apt install frei0r-plugins ffmpeg mediainfo

sudo apt install  ladspa-sdk libfftw3-dev libsdl1.2-dev libxine2-dev debhelper libarchive-dev libgdk-pixbuf-2.0-dev libsdl2-dev libxml2-dev   libavdevice-dev librtaudio-dev libsox-dev frei0r-plugins-dev libdv4-dev libmovit-dev librubberband-dev libswscale-dev imagemagick libebur128-dev libopencv-dev libsamplerate0-dev libvidstab-dev  imagemagick-6.q16 libexif-dev libpango1.0-dev libsdl1.2-compat-dev libvorbis-dev libavformat-dev libavcodec-dev libswresample-dev libavutil-dev

# Additional libraries

sudo apt install chrpath debhelper dh-python libxml2-dev python3-dev swig



# Dependencies for localization
sudo apt install ruby subversion gnupg2 gettext

Define your environment variables

• If you have specific needs and know what you're doing, you can define where you want to install your builds, like =$HOME/.local, as INSTALL_PREFIX variable:

INSTALL_PREFIX=$HOME/.local # or any other choice, the easiest would be to leave it empty ("")

Please note that even if you have specified a user-writable INSTALL_PREFIX, some Qt plugins like the MLT thumbnailer are going to be installed in non-user-writable system paths to make them work. If you really do not want to give root privileges, you need to set KDE_INSTALL_USE_QT_SYS_PATHS to OFF in the line below.

• You can also set the JOBS variable to the number of threads your CPU can offer for builds.

JOBS=8


### KDDockWidgets

If your distribution ships a recent enough version of KDDockWidgets, you could install the following package:

```bash
sudo apt install kddockwidgets-qt6

Otherwise, you should build KDDockWidgets:

git clone https://github.com/KDAB/KDDockWidgets.git
cd KDDockWidgets
mkdir build && cd build
# To build with Qt6
cmake .. -GNinja -DKDDockWidgets_QT6=ON -DKDDockWidgets_FRONTENDS=qtwidgets

# install (use make instead of ninja if ninja is not used)
ninja -j$JOBS
sudo ninja install

Building MLT

If your distribution ships a recent enough version of MLT, you could install the following packages:

sudo apt install libmlt++-dev libmlt-dev melt

And start building Kdenlive itself.

Otherwise, you should make sure these packages are not installed:

sudo apt remove libmlt++-dev libmlt-dev melt

And build MLT:

# Install MLT dependencies
sudo apt install libxml++2.6-dev libavformat-dev libswscale-dev libavfilter-dev \
libavutil-dev libavdevice-dev libsdl1.2-dev librtaudio-dev libsox-dev \
libsamplerate0-dev librubberband-dev libebur128-dev libarchive-dev frei0r-plugins-dev

# Get MLT's source code
# You will need --recurse-submodules to get the Glaxnimate code
#
git clone --recurse-submodules https://github.com/mltframework/mlt.git
cd mlt
mkdir build && cd build
# To build with Qt6, you may also enable other optional modules in this command (-GNinja is optional, to build with the faster Ninja command)
cmake .. -GNinja -DMOD_QT=OFF -DMOD_QT6=ON -DMOD_GLAXNIMATE=OFF -DMOD_GLAXNIMATE_QT6=ON

# install (use make instead of ninja if ninja is not used)
ninja -j$JOBS
sudo ninja install

If you want to uninstall it later, you can try

sudo xargs -d '\n' rm < install_manifest.txt

Build Kdenlive itself

In your development directory, run:

git clone https://invent.kde.org/multimedia/kdenlive.git
cd kdenlive
mkdir build && cd build
cmake .. -GNinja -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX -DKDE_INSTALL_USE_QT_SYS_PATHS=ON -DRELEASE_BUILD=OFF
ninja -j$JOBS
sudo ninja install

Please note that ninja install is required for Kdenlive, otherwise the effects will not be installed and cannot be used.

To uninstall Kdenlive:

sudo ninja uninstall

Running Kdenlive

If you didn't build in a system path in which all libs and data are automatically found, you will need to set environment variables to point to them. This is done by the auto-generated script in kdenlive/build that must be sourced (to keep variables set in current shell, unlike just executing the script):

. prefix.sh
kdenlive

Build with KDE Craft (Linux, Windows, macOS)

Craft is a tool to build the sources and its third-party requirements. It is an easy way to build software, but however not ideal if you want to build Kdenlive for development purposes.

1. Set up Craft as described here. (On Windows choose MinGW as compiler!)
2. Start building kdenlive. You can simply run craft --option kdenlive.version=master kdenlive
3. Within the craft environment running Kdenlive is as simple as kdenlive

Tips for Craft

• If you want to compile kdenlive in debug mode, you can do so by running craft --buildtype Debug kdenlive
• If you want to compile the stable version instead of the master branch with that last changes, remove --option kdenlive.version=master from the craft command: craft kdenlive
• If you want to compile a specific branch from the kdenlive repository use craft --option kdenlive.version=master --option kdenlive.branch=BRANCHNAME kdenlive where BRANCHNAME is the name of the branch.
• With Craft you can also easily package Kdenlive as .dmg, .exe or .appimage (depending on your platform): craft --target=master --package kdenlive The output can be found in CraftRoot/tmp
• For more instructions and tipps on Craft see https://community.kde.org/Craft

Various development tricks

Debugging

Having debug symbols helps getting much more useful information from crash logs or analyzers outputs; this is enabled at configure stage.

• append -DCMAKE_BUILD_TYPE=Debug to cmake line of kdenlive and/or mlt

Running tests

Kdenlive test coverage is focused mostly on timeline model code (extending tests to more parts is highly desired). To run those tests, append to cmake line for the build -DBUILD_TESTING=ON and execute ctest to run them.

Fuzzer

Kdenlive embeds a fuzzing engine that can detect crashes and auto-generate tests. It requires to have clang installed (generally in /usr/bin/clang++). This can be activated in cmake line with: -DBUILD_FUZZING=ON -DCMAKE_CXX_COMPILER=/usr/bin/clang++

To learn more fuzzing especially in the context of Kdenlive read this blog post.

Help file for QtCreator, KDevelop, etc.

You can automatically build and install a *.qch file with the doxygen docs about the source code to use it with your IDE like Qt Assistant, Qt Creator or KDevelop. This can be activated in cmake line with: -DBUILD_QCH=ON

You can find the kdenlive.qch at build/src and after make install at ${CMAKE_INSTALL_PREFIX}/lib/cmake/kdenlive

To add the kdenlive.qch file to Qt Creator, select Tools > Options > Help > Documentation > Add.

Speeding up compilations

Ninja build systems, compared to make, seems faster and better detecting which files are necessary to rebuild. You can enable it appending -GNinja to cmake line CCache also helps: -DCMAKE_CXX_COMPILER_LAUNCHER=ccache

If you don't need tests, disabling them will also save build time (and disk space). Append to your cmake line -DBUILD_TESTING=OFF

Analyzers

You can configure Kdenlive to embed tooling for runtime analysis, for example appending to cmake line: -DCMAKE_CXX_COMPILER=/usr/bin/clang++ -DECM_ENABLE_SANITIZERS='address'

This one will report in terminal all memory handling errors found during execution.

Building OpenCV tracking module

MLT/Kdenlive tracking effect relies on a "contrib" a OpenCV module that is not shipped by distributions. We build it in our AppImage but you may want it on your system (note OpenCV deserves its reputation of being difficult to build!).

wget https://github.com/opencv/opencv/archive/4.5.5.tar.gz -O opencv-4.5.5.tar.gz
wget https://github.com/opencv/opencv_contrib/archive/4.5.5.tar.gz -O opencv_contrib-4.5.5.tar.gz
tar xaf opencv-4.5.5.tar.gz
tar xaf opencv_contrib-4.5.5.tar.gz
cd opencv-4.5.5
mkdir build
cd build
# Important: if want to install to the default location
# (ie. you left INSTALL_PREFIX empty in the previous step where we configured it)
# remove -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX from the next command!
cmake .. -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX \
  -DOPENCV_EXTRA_MODULES_PATH=../../opencv_contrib-4.5.5/modules \
  -DOPENCV_GENERATE_PKGCONFIG=ON -DBUILD_LIST=tracking -DOPENCV_BUILD_3RDPARTY_LIBS=OFF
make install

Then you will have to rebuild MLT appending -DMOD_OPENCV=ON to cmake line!

Building frei0r

You may be interested in building latest frei0r effects library. So get dependencies, clone repository, and build-install:

sudo apt build-dep frei0r
git clone https://github.com/dyne/frei0r.git
cd frei0r
mkdir build
cd build
cmake .. -GNinja -DWITHOUT_OPENCV=true -DCMAKE_INSTALL_PREFIX=$INSTALL_PREFIX

Building in Docker

It is possible to run the above commands inside a container, with a fresh Ubuntu for example. Note that Kdenlive cannot be easily run from inside the Docker container as it is a GUI application.

# Spin up a Docker container
# The --rm flag removes the container after it is stopped.
docker run -it --rm ubuntu:22.04

# Now install the dependencies etc.
# Note that you are root in the container, and sudo neither exists nor works.
apt install …

# When you are done, exit
exit

Translating Kdenlive

Kdenlive uses KDE's internationalization (i18n) system for translations. For submitting or updating translations, please use the official KDE translation platform at l10n.kde.org.

The local translation workflow described below is for debugging purposes only. It can be useful when debugging translation issues or verifying translations work correctly in your local build in case you added or updated strings in the codebase.

Note: All text that should be translatable must use one of KDE's i18n functions like i18nc(), i18np(), etc. For more information about these functions, see the KI18n documentation.

Prerequisites

Make sure you have the required tools installed (extractrc, gettext):

# Arch Linux
sudo pacman -S gettext kde-dev-scripts

# Debian/Ubuntu
sudo apt install gettext kde-dev-utils

Translation Workflow

1. Extract strings (creates .pot file with all translatable strings from the source code): bash extract_i18n_strings.sh
2. Update existing translation (updates .po file): msgmerge --update po/fi/kdenlive.po po/kdenlive.pot
3. Edit translations: Modify the msgstr entries in the .po file
4. Compile translations (creates .mo file): msgfmt -o po/fi/kdenlive.mo po/fi/kdenlive.po
5. Test: Run Kdenlive (Switch to the target language via Settings | Configure Language)