mirror of
https://github.com/cyberboy666/r_e_c_u_r.git
synced 2025-12-05 16:00:06 +01:00
persist and check video settings, removed lcd drivers from codebase
This commit is contained in:
langolierz
54
actions.py
54
actions.py
@@ -190,20 +190,53 @@ class Actions(object):
|
|||||||
elif setting_value == 'composite':
|
elif setting_value == 'composite':
|
||||||
self.change_composite_setting(setting_value)
|
self.change_composite_setting(setting_value)
|
||||||
|
|
||||||
|
def check_and_set_output_mode_on_boot(self):
|
||||||
|
response = str(subprocess.check_output(['tvservice', '-s']))
|
||||||
|
if '0x80002' in response or '0x40002' in response:
|
||||||
|
self.data.update_setting_value('video', 'OUTPUT', 'composite')
|
||||||
|
else:
|
||||||
|
self.data.update_setting_value('video', 'OUTPUT', 'hdmi')
|
||||||
|
|
||||||
def change_composite_setting(self, setting_value):
|
def change_composite_setting(self, setting_value):
|
||||||
if setting_value == 'composite':
|
if setting_value == 'composite':
|
||||||
mode = self.data.settings['video']['COMPOSITE_TYPE']['value']
|
mode = self.data.settings['video']['COMPOSITE_TYPE']['value']
|
||||||
aspect = self.data.settings['video']['COMPOSITE_RATIO']['value']
|
aspect = self.data.settings['video']['COMPOSITE_RATIO']['value']
|
||||||
progressive = ''
|
progressive = ''
|
||||||
if self.data.settings['video']['COMPOSITE_PROGRESSIVE']['value'] == 'yes':
|
if self.data.settings['video']['COMPOSITE_PROGRESSIVE']['value'] == 'on':
|
||||||
progressive = 'p'
|
progressive = 'p'
|
||||||
subprocess.call(['tvservice --sdtvon="{} {} {}"'.format(mode, aspect, progressive)],shell=True)
|
subprocess.call(['tvservice --sdtvon="{} {} {}"'.format(mode, aspect, progressive)],shell=True)
|
||||||
self._refresh_frame_buffer()
|
self._refresh_frame_buffer()
|
||||||
|
self.persist_composite_setting(mode, progressive, aspect)
|
||||||
|
|
||||||
@staticmethod
|
@staticmethod
|
||||||
def _refresh_frame_buffer():
|
def _refresh_frame_buffer():
|
||||||
subprocess.run(["fbset -depth 16; fbset -depth 32; xrefresh -display :0" ], shell=True)
|
subprocess.run(["fbset -depth 16; fbset -depth 32; xrefresh -display :0" ], shell=True)
|
||||||
|
|
||||||
|
def persist_composite_setting(self, mode, progressive, aspect):
|
||||||
|
sdtv_mode = ''
|
||||||
|
sdtv_aspect = ''
|
||||||
|
print('mode {} , prog {} aspect {} '.format(mode, progressive, aspect))
|
||||||
|
if mode == 'PAL' and progressive == 'p':
|
||||||
|
sdtv_mode = '18'
|
||||||
|
elif mode == 'PAL' and progressive == '':
|
||||||
|
sdtv_mode = '2'
|
||||||
|
elif mode == 'NTSC' and progressive == 'p':
|
||||||
|
sdtv_mode = '16'
|
||||||
|
elif mode == 'NTSC' and progressive == '':
|
||||||
|
sdtv_mode = '0'
|
||||||
|
|
||||||
|
if aspect == '4:3':
|
||||||
|
sdtv_aspect = '1'
|
||||||
|
elif aspect == '14:9':
|
||||||
|
sdtv_aspect = '2'
|
||||||
|
elif aspect == '16:9':
|
||||||
|
sdtv_aspect = '3'
|
||||||
|
|
||||||
|
self.update_config_settings(sdtv_mode, sdtv_aspect)
|
||||||
|
|
||||||
|
def update_config_settings(self, sdtv_mode, sdtv_aspect):
|
||||||
|
self.run_script('set_composite_mode',sdtv_mode, sdtv_aspect)
|
||||||
|
|
||||||
def switch_dev_mode(self, state):
|
def switch_dev_mode(self, state):
|
||||||
if state == 'on':
|
if state == 'on':
|
||||||
self.run_script('switch_display_to_hdmi')
|
self.run_script('switch_display_to_hdmi')
|
||||||
@@ -227,21 +260,10 @@ class Actions(object):
|
|||||||
else:
|
else:
|
||||||
self.message_handler.set_message('INFO', 'failed to switch display')
|
self.message_handler.set_message('INFO', 'failed to switch display')
|
||||||
|
|
||||||
def set_composite_to_pal(self):
|
|
||||||
self.run_script('set_composite_mode','2')
|
|
||||||
self.message_handler.set_message('INFO', 'composite set to pal on next restart')
|
|
||||||
|
|
||||||
def set_composite_to_ntsc(self):
|
|
||||||
self.run_script('set_composite_mode','0')
|
|
||||||
self.message_handler.set_message('INFO', 'composite set to ntsc on next restart')
|
|
||||||
|
|
||||||
def run_script(self, script_name, script_argument=''):
|
def run_script(self, script_name, first_argument='', second_argument=''):
|
||||||
try:
|
print('first arg is {} , second is {}'.format(first_argument,second_argument))
|
||||||
subprocess.call(['/home/pi/r_e_c_u_r/dotfiles/{}.sh'.format(script_name),script_argument])
|
subprocess.call(['/home/pi/r_e_c_u_r/dotfiles/{}.sh'.format(script_name),first_argument, second_argument ])
|
||||||
except Exception as e:
|
|
||||||
if hasattr(e, 'message'):
|
|
||||||
error_info = e.message
|
|
||||||
else:
|
|
||||||
error_info = e
|
|
||||||
self.message_handler.set_message('ERROR',error_info)
|
|
||||||
|
|
||||||
|
|||||||
@@ -161,7 +161,7 @@
|
|||||||
"off",
|
"off",
|
||||||
"on"
|
"on"
|
||||||
],
|
],
|
||||||
"value": "off"
|
"value": "on"
|
||||||
},
|
},
|
||||||
"COMPOSITE_RATIO": {
|
"COMPOSITE_RATIO": {
|
||||||
"action": "change_composite_setting",
|
"action": "change_composite_setting",
|
||||||
@@ -170,7 +170,7 @@
|
|||||||
"14:9",
|
"14:9",
|
||||||
"16:9"
|
"16:9"
|
||||||
],
|
],
|
||||||
"value": "4:3"
|
"value": "14:9"
|
||||||
},
|
},
|
||||||
"COMPOSITE_TYPE": {
|
"COMPOSITE_TYPE": {
|
||||||
"action": "change_composite_setting",
|
"action": "change_composite_setting",
|
||||||
@@ -178,7 +178,7 @@
|
|||||||
"PAL",
|
"PAL",
|
||||||
"NTSC"
|
"NTSC"
|
||||||
],
|
],
|
||||||
"value": "PAL"
|
"value": "NTSC"
|
||||||
},
|
},
|
||||||
"OUTPUT": {
|
"OUTPUT": {
|
||||||
"action": "change_output_mode",
|
"action": "change_output_mode",
|
||||||
|
|||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "4034 31 11 3879"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
sudo cp -rf ./etc/modules-HDMI /etc/modules
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
sudo cp ./boot/config-nomal.txt /boot/config.txt
|
|
||||||
#sudo cp ./cmdline.txt /boot/
|
|
||||||
#sudo cp ./inittab /etc/
|
|
||||||
sudo reboot
|
|
||||||
@@ -1,49 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-101-1024x600.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-101-1024x600.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-101-1024x600.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-101-1024x600.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#sudo cp ./cmdline.txt /boot/
|
|
||||||
#sudo cp ./inittab /etc/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD101-1024x600-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,53 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/waveshare32b.dtbo
|
|
||||||
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
|
|
||||||
if [ -b /dev/mmcblk0p7 ]; then
|
|
||||||
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
|
|
||||||
else
|
|
||||||
sudo cp ./cmdline.txt /boot/
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./inittab /etc/
|
|
||||||
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD32-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,53 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-32.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/waveshare32b.dtbo
|
|
||||||
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
|
|
||||||
if [ -b /dev/mmcblk0p7 ]; then
|
|
||||||
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
|
|
||||||
else
|
|
||||||
sudo cp ./cmdline.txt /boot/
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./inittab /etc/
|
|
||||||
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD32-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,44 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35H /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35H-480x320.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35H-480x320.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35H-480x320.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35H-480x320.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD5-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,44 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35H /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD5-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,52 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/waveshare35a.dtbo
|
|
||||||
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
|
|
||||||
if [ -b /dev/mmcblk0p7 ]; then
|
|
||||||
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
|
|
||||||
else
|
|
||||||
sudo cp ./cmdline.txt /boot/
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./inittab /etc/
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD35-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,52 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35b.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35b.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35b.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35b.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./waveshare35b-overlay.dtb /boot/overlays/waveshare35b.dtbo
|
|
||||||
sudo cp ./waveshare35b-overlay.dtb /boot/overlays/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
|
|
||||||
if [ -b /dev/mmcblk0p7 ]; then
|
|
||||||
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
|
|
||||||
else
|
|
||||||
sudo cp ./cmdline.txt /boot/
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./inittab /etc/
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD35B-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,52 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld //usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35cpld.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35cpld.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35cpld.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-35cpld.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./waveshare35cpld-overlay.dtb /boot/overlays/waveshare35cpld.dtbo
|
|
||||||
sudo cp ./waveshare35cpld-overlay.dtb /boot/overlays/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
|
|
||||||
if [ -b /dev/mmcblk0p7 ]; then
|
|
||||||
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
|
|
||||||
else
|
|
||||||
sudo cp ./cmdline.txt /boot/
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./inittab /etc/
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD35-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,48 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4-800x480.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4-800x480.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4-800x480.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4-800x480.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#sudo cp ./cmdline.txt /boot/
|
|
||||||
#sudo cp ./inittab /etc/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD4-800x480-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,52 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-4.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/waveshare35a.dtbo
|
|
||||||
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
|
|
||||||
if [ -b /dev/mmcblk0p7 ]; then
|
|
||||||
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
|
|
||||||
else
|
|
||||||
sudo cp ./cmdline.txt /boot/
|
|
||||||
fi
|
|
||||||
|
|
||||||
sudo cp ./inittab /etc/
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD4-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,48 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-43.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-43.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-43.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-43.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#sudo cp ./cmdline.txt /boot/
|
|
||||||
#sudo cp ./inittab /etc/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD43-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,48 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-5.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#sudo cp ./cmdline.txt /boot/
|
|
||||||
#sudo cp ./inittab /etc/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD5-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,49 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-1024x600.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-1024x600.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-1024x600.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-1024x600.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#sudo cp ./cmdline.txt /boot/
|
|
||||||
#sudo cp ./inittab /etc/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD7-1024x600-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,49 +0,0 @@
|
|||||||
i=1
|
|
||||||
for lines in `cat ./boot/mark`
|
|
||||||
do
|
|
||||||
case ${i} in
|
|
||||||
1) var1=${lines};;
|
|
||||||
esac
|
|
||||||
i=`expr ${i} + 1`
|
|
||||||
done
|
|
||||||
#echo "$var1"
|
|
||||||
|
|
||||||
if test "$var1" = "0";then
|
|
||||||
#sudo mkdir /etc/X11/xorg.conf.d
|
|
||||||
sudo apt-get install xserver-xorg-input-evdev
|
|
||||||
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
|
|
||||||
echo "1" > ./boot/mark
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
if test "$1" = "0" -o "$#" = "0"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-800x480.txt /boot/config.txt
|
|
||||||
echo "LCD configrue 0"
|
|
||||||
elif test "$1" = "90"; then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-800x480.txt-90 /boot/config.txt
|
|
||||||
echo "LCD configrue 90"
|
|
||||||
elif test "$1" = "180";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-800x480.txt-180 /boot/config.txt
|
|
||||||
echo "LCD configrue 180"
|
|
||||||
elif test "$1" = "270";then
|
|
||||||
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
|
|
||||||
sudo cp ./boot/config-7-800x480.txt-270 /boot/config.txt
|
|
||||||
echo "LCD configrue 270"
|
|
||||||
fi
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#sudo cp ./cmdline.txt /boot/
|
|
||||||
#sudo cp ./inittab /etc/
|
|
||||||
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
|
|
||||||
|
|
||||||
|
|
||||||
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
|
|
||||||
sudo reboot
|
|
||||||
echo "reboot now"
|
|
||||||
else
|
|
||||||
echo "Invalid parameter,Usage:LCD7-800x480-show [0] [90] [180] [270]"
|
|
||||||
fi
|
|
||||||
@@ -1,64 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=2
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 120 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,64 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=0
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 120 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,64 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=3
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 120 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,64 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 120 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare32b:rotate=270
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare32b:rotate=90
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare32b:rotate=180
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare32b:rotate=0
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,65 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
## gives more memory to the gpu for playing 1080 videos (might need to adjust this when using older pis with less memory)
|
|
||||||
gpu_mem=448
|
|
||||||
## enables the raspi camera
|
|
||||||
start_x=1
|
|
||||||
##fixes bug with playback freezing
|
|
||||||
audio_pwm_mode=0
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
#hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
sdtv_mode=0
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a:rotate=270
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a:rotate=0
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a:rotate=180
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,62 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 320 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 320 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=2
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 320 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=3
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 320 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35b
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35b:rotate=270
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35b:rotate=0
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35b:rotate=180
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35cpld
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35cpld:rotate=270
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35cpld:rotate=0
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35cpld:rotate=180
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 800 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=3
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 800 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,62 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 800 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,62 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 800 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 480 800 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=2
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a:rotate=270
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a:rotate=0
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,58 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
dtoverlay=waveshare35a:rotate=180
|
|
||||||
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=2
|
|
||||||
max_usb_current=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=0
|
|
||||||
max_usb_current=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=3
|
|
||||||
max_usb_current=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=1
|
|
||||||
max_usb_current=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,62 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=2
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=3
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
display_rotate=1
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,62 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=2
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=3
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 1024 600 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=1
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,62 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=2
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=3
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
#sdtv_mode=2
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
hdmi_group=2
|
|
||||||
hdmi_mode=1
|
|
||||||
hdmi_mode=87
|
|
||||||
hdmi_cvt 800 480 60 6 0 0 0
|
|
||||||
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
|
|
||||||
display_rotate=1
|
|
||||||
hdmi_drive=1
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
# For more options and information see
|
|
||||||
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
|
|
||||||
# Some settings may impact device functionality. See link above for details
|
|
||||||
|
|
||||||
## gives more memory to the gpu for playing 1080 videos (might need to adjust this when using older pis with less memory)
|
|
||||||
gpu_mem=448
|
|
||||||
## enables the raspi camera
|
|
||||||
start_x=1
|
|
||||||
##fixes bug with playback freezing
|
|
||||||
audio_pwm_mode=0
|
|
||||||
|
|
||||||
# uncomment if you get no picture on HDMI for a default "safe" mode
|
|
||||||
#hdmi_safe=1
|
|
||||||
|
|
||||||
# uncomment this if your display has a black border of unused pixels visible
|
|
||||||
# and your display can output without overscan
|
|
||||||
#disable_overscan=1
|
|
||||||
|
|
||||||
# uncomment the following to adjust overscan. Use positive numbers if console
|
|
||||||
# goes off screen, and negative if there is too much border
|
|
||||||
#overscan_left=16
|
|
||||||
#overscan_right=16
|
|
||||||
#overscan_top=16
|
|
||||||
#overscan_bottom=16
|
|
||||||
|
|
||||||
# uncomment to force a console size. By default it will be display's size minus
|
|
||||||
# overscan.
|
|
||||||
#framebuffer_width=1280
|
|
||||||
#framebuffer_height=720
|
|
||||||
|
|
||||||
# uncomment if hdmi display is not detected and composite is being output
|
|
||||||
#hdmi_force_hotplug=1
|
|
||||||
|
|
||||||
# uncomment to force a specific HDMI mode (this will force VGA)
|
|
||||||
#hdmi_group=1
|
|
||||||
#hdmi_mode=1
|
|
||||||
|
|
||||||
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
|
|
||||||
# DMT (computer monitor) modes
|
|
||||||
#hdmi_drive=2
|
|
||||||
|
|
||||||
# uncomment to increase signal to HDMI, if you have interference, blanking, or
|
|
||||||
# no display
|
|
||||||
#config_hdmi_boost=4
|
|
||||||
|
|
||||||
# uncomment for composite PAL
|
|
||||||
sdtv_mode=0
|
|
||||||
|
|
||||||
#uncomment to overclock the arm. 700 MHz is the default.
|
|
||||||
#arm_freq=800
|
|
||||||
|
|
||||||
# Uncomment some or all of these to enable the optional hardware interfaces
|
|
||||||
dtparam=i2c_arm=on
|
|
||||||
#dtparam=i2s=on
|
|
||||||
dtparam=spi=on
|
|
||||||
enable_uart=1
|
|
||||||
# Uncomment this to enable the lirc-rpi module
|
|
||||||
#dtoverlay=lirc-rpi
|
|
||||||
|
|
||||||
# Additional overlays and parameters are documented /boot/overlays/README
|
|
||||||
|
|
||||||
# Enable audio (loads snd_bcm2835)
|
|
||||||
dtparam=audio=on
|
|
||||||
@@ -1 +0,0 @@
|
|||||||
1
|
|
||||||
@@ -1 +0,0 @@
|
|||||||
dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 quiet splash logo.nologo plymouth.ignore-serial-consoles
|
|
||||||
@@ -1 +0,0 @@
|
|||||||
dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo
|
|
||||||
@@ -1,63 +0,0 @@
|
|||||||
#!/bin/sh -e
|
|
||||||
|
|
||||||
check_dpkg () {
|
|
||||||
LC_ALL=C dpkg --list | awk '{print $2}' | grep "^${pkg}" >/dev/null || deb_pkgs="${deb_pkgs}${pkg} "
|
|
||||||
}
|
|
||||||
|
|
||||||
unset deb_pkgs
|
|
||||||
pkg="bison"
|
|
||||||
check_dpkg
|
|
||||||
pkg="build-essential"
|
|
||||||
check_dpkg
|
|
||||||
pkg="flex"
|
|
||||||
check_dpkg
|
|
||||||
pkg="git-core"
|
|
||||||
check_dpkg
|
|
||||||
|
|
||||||
if [ "${deb_pkgs}" ] ; then
|
|
||||||
echo "Installing: ${deb_pkgs}"
|
|
||||||
sudo apt-get update
|
|
||||||
sudo apt-get -y install ${deb_pkgs}
|
|
||||||
sudo apt-get clean
|
|
||||||
fi
|
|
||||||
|
|
||||||
#git_sha="origin/master"
|
|
||||||
#git_sha="27cdc1b16f86f970c3c049795d4e71ad531cca3d"
|
|
||||||
#git_sha="fdc7387845420168ee5dd479fbe4391ff93bddab"
|
|
||||||
git_sha="65cc4d2748a2c2e6f27f1cf39e07a5dbabd80ebf"
|
|
||||||
project="dtc"
|
|
||||||
server="git://git.kernel.org/pub/scm/linux/kernel/git/jdl"
|
|
||||||
|
|
||||||
if [ ! -f ${HOME}/git/${project}/.git/config ] ; then
|
|
||||||
git clone ${server}/${project}.git ${HOME}/git/${project}/
|
|
||||||
fi
|
|
||||||
|
|
||||||
if [ ! -f ${HOME}/git/${project}/.git/config ] ; then
|
|
||||||
rm -rf ${HOME}/git/${project}/ || true
|
|
||||||
echo "error: git failure, try re-runing"
|
|
||||||
exit
|
|
||||||
fi
|
|
||||||
|
|
||||||
unset old_address
|
|
||||||
old_address=$(cat ${HOME}/git/${project}/.git/config | grep "jdl.com" || true)
|
|
||||||
if [ ! "x${old_address}" = "x" ] ; then
|
|
||||||
sed -i -e 's:git.jdl.com/software:git.kernel.org/pub/scm/linux/kernel/git/jdl:g' ${HOME}/git/${project}/.git/config
|
|
||||||
fi
|
|
||||||
|
|
||||||
cd ${HOME}/git/${project}/
|
|
||||||
make clean
|
|
||||||
git checkout master -f
|
|
||||||
git pull || true
|
|
||||||
|
|
||||||
test_for_branch=$(git branch --list ${git_sha}-build)
|
|
||||||
if [ "x${test_for_branch}" != "x" ] ; then
|
|
||||||
git branch ${git_sha}-build -D
|
|
||||||
fi
|
|
||||||
|
|
||||||
git checkout ${git_sha} -b ${git_sha}-build
|
|
||||||
git pull git://github.com/RobertCNelson/dtc.git dtc-fixup-65cc4d2
|
|
||||||
|
|
||||||
make clean
|
|
||||||
make PREFIX=/usr/local/ CC=gcc CROSS_COMPILE= all
|
|
||||||
echo "Installing into: /usr/local/bin/"
|
|
||||||
sudo make PREFIX=/usr/local/ install
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "4034 31 11 3879"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "31 4034 3879 11"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "31 4034 11 3879"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "4034 31 3879 11"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "219 3835 3984 219"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3835 219 219 3984"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3835 219 3984 219"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "219 3835 219 3984"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3932 300 294 3801"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "300 3932 3801 294"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "300 3932 294 3801"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3932 300 3801 294"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "190 3991 243 3895"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3932 300 294 3801"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "300 3932 3801 294"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "300 3932 294 3801"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3932 300 3801 294"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "82 3941 127 3875"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3932 300 3801 294"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "300 3932 3801 294"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3932 300 294 3801"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3950 172 3871 194"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "172 3950 194 3871"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3950 172 194 3871"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "172 3950 3871 194"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3905 208 3910 288"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "208 3905 288 3910"
|
|
||||||
Option "SwapAxes" "0"
|
|
||||||
EndSection
|
|
||||||
@@ -1,6 +0,0 @@
|
|||||||
Section "InputClass"
|
|
||||||
Identifier "calibration"
|
|
||||||
MatchProduct "ADS7846 Touchscreen"
|
|
||||||
Option "Calibration" "3905 208 288 3910"
|
|
||||||
Option "SwapAxes" "1"
|
|
||||||
EndSection
|
|
||||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user