eessppeelllloo/r_e_c_u_r
1
0
Fork 0
mirror of https://github.com/cyberboy666/r_e_c_u_r.git synced 2025-12-05 16:00:06 +01:00
Code Issues Packages Projects Releases Wiki Activity

persist and check video settings, removed lcd drivers from codebase

Browse Source
This commit is contained in:
langolierz
2018-04-30 21:51:56 +00:00
parent 80ce89b619
commit 81380de1b5
121 changed files with 45 additions and 4236 deletions
Download Patch File Download Diff File Expand all files Collapse all files

54
actions.py
View File

@@ -190,20 +190,53 @@ class Actions(object):
elif setting_value == 'composite':
self.change_composite_setting(setting_value)
def check_and_set_output_mode_on_boot(self):
response = str(subprocess.check_output(['tvservice', '-s']))
if '0x80002' in response or '0x40002' in response:
self.data.update_setting_value('video', 'OUTPUT', 'composite')
else:
self.data.update_setting_value('video', 'OUTPUT', 'hdmi')
def change_composite_setting(self, setting_value):
if setting_value == 'composite':
mode = self.data.settings['video']['COMPOSITE_TYPE']['value']
aspect = self.data.settings['video']['COMPOSITE_RATIO']['value']
progressive = ''
if self.data.settings['video']['COMPOSITE_PROGRESSIVE']['value'] == 'yes':
if self.data.settings['video']['COMPOSITE_PROGRESSIVE']['value'] == 'on':
progressive = 'p'
subprocess.call(['tvservice --sdtvon="{} {} {}"'.format(mode, aspect, progressive)],shell=True)
self._refresh_frame_buffer()
self.persist_composite_setting(mode, progressive, aspect)
@staticmethod
def _refresh_frame_buffer():
subprocess.run(["fbset -depth 16; fbset -depth 32; xrefresh -display :0" ], shell=True)
def persist_composite_setting(self, mode, progressive, aspect):
sdtv_mode = ''
sdtv_aspect = ''
print('mode {} , prog {} aspect {} '.format(mode, progressive, aspect))
if mode == 'PAL' and progressive == 'p':
sdtv_mode = '18'
elif mode == 'PAL' and progressive == '':
sdtv_mode = '2'
elif mode == 'NTSC' and progressive == 'p':
sdtv_mode = '16'
elif mode == 'NTSC' and progressive == '':
sdtv_mode = '0'
if aspect == '4:3':
sdtv_aspect = '1'
elif aspect == '14:9':
sdtv_aspect = '2'
elif aspect == '16:9':
sdtv_aspect = '3'
self.update_config_settings(sdtv_mode, sdtv_aspect)
def update_config_settings(self, sdtv_mode, sdtv_aspect):
self.run_script('set_composite_mode',sdtv_mode, sdtv_aspect)
def switch_dev_mode(self, state):
if state == 'on':
self.run_script('switch_display_to_hdmi')
@@ -227,21 +260,10 @@ class Actions(object):
else:
self.message_handler.set_message('INFO', 'failed to switch display')
def set_composite_to_pal(self):
self.run_script('set_composite_mode','2')
self.message_handler.set_message('INFO', 'composite set to pal on next restart')
def set_composite_to_ntsc(self):
self.run_script('set_composite_mode','0')
self.message_handler.set_message('INFO', 'composite set to ntsc on next restart')
def run_script(self, script_name, script_argument=''):
try:
subprocess.call(['/home/pi/r_e_c_u_r/dotfiles/{}.sh'.format(script_name),script_argument])
except Exception as e:
if hasattr(e, 'message'):
error_info = e.message
else:
error_info = e
self.message_handler.set_message('ERROR',error_info)
def run_script(self, script_name, first_argument='', second_argument=''):
print('first arg is {} , second is {}'.format(first_argument,second_argument))
subprocess.call(['/home/pi/r_e_c_u_r/dotfiles/{}.sh'.format(script_name),first_argument, second_argument ])

6
data_centre/json_objects/settings.json
View File

@@ -161,7 +161,7 @@
"off",
"on"
],
"value": "off"
"value": "on"
},
"COMPOSITE_RATIO": {
"action": "change_composite_setting",
@@ -170,7 +170,7 @@
"14:9",
"16:9"
],
"value": "4:3"
"value": "14:9"
},
"COMPOSITE_TYPE": {
"action": "change_composite_setting",
@@ -178,7 +178,7 @@
"PAL",
"NTSC"
],
"value": "PAL"
"value": "NTSC"
},
"OUTPUT": {
"action": "change_output_mode",

6
dotfiles/lcd_display_drivers/LCD-show/ /99-calibration.conf-101-1024x600
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "4034 31 11 3879"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/LCD-hdmi
View File

@@ -1,6 +0,0 @@
sudo cp -rf ./etc/modules-HDMI /etc/modules
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
sudo cp ./boot/config-nomal.txt /boot/config.txt
#sudo cp ./cmdline.txt /boot/
#sudo cp ./inittab /etc/
sudo reboot

49
dotfiles/lcd_display_drivers/LCD-show/LCD101-1024x600-show
View File

@@ -1,49 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-101-1024x600.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-101-1024x600.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-101-1024x600.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-101-1024x600.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
#sudo cp ./cmdline.txt /boot/
#sudo cp ./inittab /etc/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD101-1024x600-show [0] [90] [180] [270]"
fi

53
dotfiles/lcd_display_drivers/LCD-show/LCD28-show
View File

@@ -1,53 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/waveshare32b.dtbo
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
if [ -b /dev/mmcblk0p7 ]; then
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
else
sudo cp ./cmdline.txt /boot/
fi
sudo cp ./inittab /etc/
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD32-show [0] [90] [180] [270]"
fi

53
dotfiles/lcd_display_drivers/LCD-show/LCD32-show
View File

@@ -1,53 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-32-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-32.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/waveshare32b.dtbo
sudo cp ./waveshare32b-overlay.dtb /boot/overlays/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
if [ -b /dev/mmcblk0p7 ]; then
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
else
sudo cp ./cmdline.txt /boot/
fi
sudo cp ./inittab /etc/
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD32-show [0] [90] [180] [270]"
fi

44
dotfiles/lcd_display_drivers/LCD-show/LCD35-HDMI-480x320-show
View File

@@ -1,44 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35H /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35H-480x320.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35H-480x320.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35H-480x320.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35H-480x320.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD5-show [0] [90] [180] [270]"
fi

44
dotfiles/lcd_display_drivers/LCD-show/LCD35-HDMI-800x480-show
View File

@@ -1,44 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35H /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD5-show [0] [90] [180] [270]"
fi

52
dotfiles/lcd_display_drivers/LCD-show/LCD35-show
View File

@@ -1,52 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/waveshare35a.dtbo
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
if [ -b /dev/mmcblk0p7 ]; then
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
else
sudo cp ./cmdline.txt /boot/
fi
sudo cp ./inittab /etc/
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD35-show [0] [90] [180] [270]"
fi

52
dotfiles/lcd_display_drivers/LCD-show/LCD35B-show
View File

@@ -1,52 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35b.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35b.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35b.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35b-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35b.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp ./waveshare35b-overlay.dtb /boot/overlays/waveshare35b.dtbo
sudo cp ./waveshare35b-overlay.dtb /boot/overlays/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
if [ -b /dev/mmcblk0p7 ]; then
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
else
sudo cp ./cmdline.txt /boot/
fi
sudo cp ./inittab /etc/
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD35B-show [0] [90] [180] [270]"
fi

52
dotfiles/lcd_display_drivers/LCD-show/LCD35CPLD-show
View File

@@ -1,52 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld //usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35cpld.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35cpld.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35cpld.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-35cpld-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-35cpld.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp ./waveshare35cpld-overlay.dtb /boot/overlays/waveshare35cpld.dtbo
sudo cp ./waveshare35cpld-overlay.dtb /boot/overlays/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
if [ -b /dev/mmcblk0p7 ]; then
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
else
sudo cp ./cmdline.txt /boot/
fi
sudo cp ./inittab /etc/
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD35-show [0] [90] [180] [270]"
fi

48
dotfiles/lcd_display_drivers/LCD-show/LCD4-800x480-show
View File

@@ -1,48 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4-800x480.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4-800x480.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4-800x480.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4-800x480.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
#sudo cp ./cmdline.txt /boot/
#sudo cp ./inittab /etc/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD4-800x480-show [0] [90] [180] [270]"
fi

52
dotfiles/lcd_display_drivers/LCD-show/LCD4-show
View File

@@ -1,52 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-4-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-4.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/waveshare35a.dtbo
sudo cp ./waveshare35a-overlay.dtb /boot/overlays/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/
if [ -b /dev/mmcblk0p7 ]; then
sudo cp ./cmdline.txt-noobs /boot/cmdline.txt
else
sudo cp ./cmdline.txt /boot/
fi
sudo cp ./inittab /etc/
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD4-show [0] [90] [180] [270]"
fi

48
dotfiles/lcd_display_drivers/LCD-show/LCD43-show
View File

@@ -1,48 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-43.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-43.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-43.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-43-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-43.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
#sudo cp ./cmdline.txt /boot/
#sudo cp ./inittab /etc/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD43-show [0] [90] [180] [270]"
fi

48
dotfiles/lcd_display_drivers/LCD-show/LCD5-show
View File

@@ -1,48 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-5-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-5.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
#sudo cp ./cmdline.txt /boot/
#sudo cp ./inittab /etc/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD5-show [0] [90] [180] [270]"
fi

49
dotfiles/lcd_display_drivers/LCD-show/LCD7-1024x600-show
View File

@@ -1,49 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-1024x600.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-1024x600.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-1024x600.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-1024x600.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
#sudo cp ./cmdline.txt /boot/
#sudo cp ./inittab /etc/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD7-1024x600-show [0] [90] [180] [270]"
fi

49
dotfiles/lcd_display_drivers/LCD-show/LCD7-800x480-show
View File

@@ -1,49 +0,0 @@
i=1
for lines in `cat ./boot/mark`
do
case ${i} in
1) var1=${lines};;
esac
i=`expr ${i} + 1`
done
#echo "$var1"
if test "$var1" = "0";then
#sudo mkdir /etc/X11/xorg.conf.d
sudo apt-get install xserver-xorg-input-evdev
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
echo "1" > ./boot/mark
fi
if test "$1" = "0" -o "$#" = "0"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-800x480.txt /boot/config.txt
echo "LCD configrue 0"
elif test "$1" = "90"; then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-90 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-800x480.txt-90 /boot/config.txt
echo "LCD configrue 90"
elif test "$1" = "180";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-180 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-800x480.txt-180 /boot/config.txt
echo "LCD configrue 180"
elif test "$1" = "270";then
sudo cp -rf ./etc/X11/xorg.conf.d/99-calibration.conf-7-1024x600-270 /usr/share/X11/xorg.conf.d/99-calibration.conf
sudo cp ./boot/config-7-800x480.txt-270 /boot/config.txt
echo "LCD configrue 270"
fi
#sudo cp ./cmdline.txt /boot/
#sudo cp ./inittab /etc/
sudo cp -rf ./usr/share/X11/xorg.conf.d/99-fbturbo.conf-HDMI /usr/share/X11/xorg.conf.d/99-fbturbo.conf
if test "$#" = "0" -o "$1" = "0" -o "$1" = "90" -o "$1" = "180" -o "$1" = "270"; then
sudo reboot
echo "reboot now"
else
echo "Invalid parameter,Usage:LCD7-800x480-show [0] [90] [180] [270]"
fi

64
dotfiles/lcd_display_drivers/LCD-show/boot/config-101-1024x600.txt
View File

@@ -1,64 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=2
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 120 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

64
dotfiles/lcd_display_drivers/LCD-show/boot/config-101-1024x600.txt-180
View File

@@ -1,64 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=0
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 120 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

64
dotfiles/lcd_display_drivers/LCD-show/boot/config-101-1024x600.txt-270
View File

@@ -1,64 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=3
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 120 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

64
dotfiles/lcd_display_drivers/LCD-show/boot/config-101-1024x600.txt-90
View File

@@ -1,64 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 120 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-32.txt
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare32b:rotate=270
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-32.txt-180
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare32b:rotate=90
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-32.txt-270
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare32b:rotate=180
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-32.txt-90
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare32b:rotate=0
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35.txt
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

65
dotfiles/lcd_display_drivers/LCD-show/boot/config-35.txt-180
View File

@@ -1,65 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
## gives more memory to the gpu for playing 1080 videos (might need to adjust this when using older pis with less memory)
gpu_mem=448
## enables the raspi camera
start_x=1
##fixes bug with playback freezing
audio_pwm_mode=0
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
sdtv_mode=0
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a:rotate=270
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35.txt-270
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a:rotate=0
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35.txt-90
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a:rotate=180
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

62
dotfiles/lcd_display_drivers/LCD-show/boot/config-35H-480x320.txt
View File

@@ -1,62 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 320 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-35H-480x320.txt-180
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 320 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=2
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-35H-480x320.txt-270
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 320 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=3
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-35H-480x320.txt-90
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 320 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35b.txt
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35b
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35b.txt-180
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35b:rotate=270
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35b.txt-270
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35b:rotate=0
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35b.txt-90
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35b:rotate=180
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35cpld.txt
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35cpld
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35cpld.txt-180
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35cpld:rotate=270
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35cpld.txt-270
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35cpld:rotate=0
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-35cpld.txt-90
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35cpld:rotate=180
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=1,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-4-800x480.txt
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 800 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=3
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-4-800x480.txt-180
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 800 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

62
dotfiles/lcd_display_drivers/LCD-show/boot/config-4-800x480.txt-270
View File

@@ -1,62 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 800 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

62
dotfiles/lcd_display_drivers/LCD-show/boot/config-4-800x480.txt-270Y
View File

@@ -1,62 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 800 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-4-800x480.txt-90
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 480 800 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=2
hdmi_drive=1

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-4.txt
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-4.txt-180
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a:rotate=270
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-4.txt-270
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a:rotate=0
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

58
dotfiles/lcd_display_drivers/LCD-show/boot/config-4.txt-90
View File

@@ -1,58 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
dtoverlay=waveshare35a:rotate=180
#dtoverlay=ads7846,cs=1,penirq=17,penirq_pull=2,speed=1000000,keep_vref_on=1,swapxy=0,pmax=255,xohms=60,xmin=200,xmax=3900,ymin=200,ymax=3900

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-43.txt
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=2
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-43.txt-180
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=0
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-43.txt-270
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=3
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-43.txt-90
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=1
max_usb_current=1
hdmi_group=2
hdmi_mode=87
hdmi_timings=480 0 1 41 2 272 0 2 10 2 0 0 0 60 0 9009000 3
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

62
dotfiles/lcd_display_drivers/LCD-show/boot/config-5.txt
View File

@@ -1,62 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-5.txt-180
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=2
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-5.txt-270
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=3
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-5.txt-90
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
display_rotate=1
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

62
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-1024x600.txt
View File

@@ -1,62 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-1024x600.txt-180
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=2
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-1024x600.txt-270
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=3
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-1024x600.txt-90
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 1024 600 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=1
hdmi_drive=1

62
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-800x480.txt
View File

@@ -1,62 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-800x480.txt-180
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=2
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-800x480.txt-270
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=3
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-7-800x480.txt-90
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
hdmi_group=2
hdmi_mode=1
hdmi_mode=87
hdmi_cvt 800 480 60 6 0 0 0
dtoverlay=ads7846,cs=1,penirq=25,penirq_pull=2,speed=50000,keep_vref_on=0,swapxy=0,pmax=255,xohms=150,xmin=200,xmax=3900,ymin=200,ymax=3900
display_rotate=1
hdmi_drive=1

63
dotfiles/lcd_display_drivers/LCD-show/boot/config-nomal.txt
View File

@@ -1,63 +0,0 @@
# For more options and information see
# http://www.raspberrypi.org/documentation/configuration/config-txt.md
# Some settings may impact device functionality. See link above for details
## gives more memory to the gpu for playing 1080 videos (might need to adjust this when using older pis with less memory)
gpu_mem=448
## enables the raspi camera
start_x=1
##fixes bug with playback freezing
audio_pwm_mode=0
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
#disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
sdtv_mode=0
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
dtparam=i2c_arm=on
#dtparam=i2s=on
dtparam=spi=on
enable_uart=1
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on

1
dotfiles/lcd_display_drivers/LCD-show/boot/mark
View File

@@ -1 +0,0 @@
1

1
dotfiles/lcd_display_drivers/LCD-show/cmdline.txt
View File

@@ -1 +0,0 @@
dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 quiet splash logo.nologo plymouth.ignore-serial-consoles

1
dotfiles/lcd_display_drivers/LCD-show/cmdline.txt-noobs
View File

@@ -1 +0,0 @@
dwc_otg.lpm_enable=0 console=tty1 console=ttyAMA0,115200 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline rootwait fbcon=map:10 fbcon=font:ProFont6x11 logo.nologo

63
dotfiles/lcd_display_drivers/LCD-show/dtc.sh
View File

@@ -1,63 +0,0 @@
#!/bin/sh -e
check_dpkg () {
LC_ALL=C dpkg --list | awk '{print $2}' | grep "^${pkg}" >/dev/null || deb_pkgs="${deb_pkgs}${pkg} "
}
unset deb_pkgs
pkg="bison"
check_dpkg
pkg="build-essential"
check_dpkg
pkg="flex"
check_dpkg
pkg="git-core"
check_dpkg
if [ "${deb_pkgs}" ] ; then
echo "Installing: ${deb_pkgs}"
sudo apt-get update
sudo apt-get -y install ${deb_pkgs}
sudo apt-get clean
fi
#git_sha="origin/master"
#git_sha="27cdc1b16f86f970c3c049795d4e71ad531cca3d"
#git_sha="fdc7387845420168ee5dd479fbe4391ff93bddab"
git_sha="65cc4d2748a2c2e6f27f1cf39e07a5dbabd80ebf"
project="dtc"
server="git://git.kernel.org/pub/scm/linux/kernel/git/jdl"
if [ ! -f ${HOME}/git/${project}/.git/config ] ; then
git clone ${server}/${project}.git ${HOME}/git/${project}/
fi
if [ ! -f ${HOME}/git/${project}/.git/config ] ; then
rm -rf ${HOME}/git/${project}/ || true
echo "error: git failure, try re-runing"
exit
fi
unset old_address
old_address=$(cat ${HOME}/git/${project}/.git/config | grep "jdl.com" || true)
if [ ! "x${old_address}" = "x" ] ; then
sed -i -e 's:git.jdl.com/software:git.kernel.org/pub/scm/linux/kernel/git/jdl:g' ${HOME}/git/${project}/.git/config
fi
cd ${HOME}/git/${project}/
make clean
git checkout master -f
git pull || true
test_for_branch=$(git branch --list ${git_sha}-build)
if [ "x${test_for_branch}" != "x" ] ; then
git branch ${git_sha}-build -D
fi
git checkout ${git_sha} -b ${git_sha}-build
git pull git://github.com/RobertCNelson/dtc.git dtc-fixup-65cc4d2
make clean
make PREFIX=/usr/local/ CC=gcc CROSS_COMPILE= all
echo "Installing into: /usr/local/bin/"
sudo make PREFIX=/usr/local/ install

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "4034 31 11 3879"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-180
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "31 4034 3879 11"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-270
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "31 4034 11 3879"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-101-1024x600-90
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "4034 31 3879 11"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "219 3835 3984 219"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-180
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3835 219 219 3984"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-270
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3835 219 3984 219"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-32-90
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "219 3835 219 3984"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3932 300 294 3801"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-180
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "300 3932 3801 294"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-270
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "300 3932 294 3801"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35-90
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3932 300 3801 294"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35H
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "190 3991 243 3895"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3932 300 294 3801"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-180
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "300 3932 3801 294"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-270
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "300 3932 294 3801"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35b-90
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3932 300 3801 294"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "82 3941 127 3875"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld-180
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3932 300 3801 294"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld-270
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "300 3932 3801 294"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-35cpld-90
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3932 300 294 3801"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3950 172 3871 194"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-180
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "172 3950 194 3871"
Option "SwapAxes" "1"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-270
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3950 172 194 3871"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-4-90
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "172 3950 3871 194"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3905 208 3910 288"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-180
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "208 3905 288 3910"
Option "SwapAxes" "0"
EndSection

6
dotfiles/lcd_display_drivers/LCD-show/etc/X11/xorg.conf.d/99-calibration.conf-43-270
View File

@@ -1,6 +0,0 @@
Section "InputClass"
Identifier "calibration"
MatchProduct "ADS7846 Touchscreen"
Option "Calibration" "3905 208 288 3910"
Option "SwapAxes" "1"
EndSection

Some files were not shown because too many files have changed in this diff Show More