eessppeelllloo/esp8266_deauther
1
0
Fork 0
mirror of https://github.com/SpacehuhnTech/esp8266_deauther.git synced 2025-12-22 14:40:05 +01:00
Code Issues Packages Projects Releases Wiki Activity

Update A_config.h

Browse Source
This commit is contained in:
Stefan Kremser
2018-10-14 16:56:45 +02:00
committed by GitHub
parent 83dd628bba
commit 95dc36850b
1 changed files with 1 additions and 53 deletions
Download Patch File Download Diff File Expand all files Collapse all files

54
configs/DSTIKE_Deauther_OLED_v1-v1.5/A_config.h
View File

@@ -11,72 +11,20 @@
// =========================== // // =========================== //
// ===================== LED CONFIG ==================== // // ===================== LED CONFIG ==================== //
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Uncomment the type of LED you're using
Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
#define DIGITAL_LED #define DIGITAL_LED
//#define RGB_LED
//#define NEOPIXEL_LED
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Adjust following settings for your type of LED
you can ignore the rest of the #define's
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
// === Settings for Digital LED and RGB LED === //
#define LED_ANODE false // common vcc (+) #define LED_ANODE false // common vcc (+)
#define LED_PIN_R 16 // NodeMCU on-board LED #define LED_PIN_R 16 // NodeMCU on-board LED
#define LED_PIN_G 255 // 255 = LED disabled #define LED_PIN_G 255 // 255 = LED disabled
#define LED_PIN_B 2 // ESP-12 LED #define LED_PIN_B 2 // ESP-12 LED
// === Settings for RGB LED and Neopixel LED === //
#define LED_MODE_BRIGHTNESS 10 // brightness of LED modes
// === Settings for Neopixel LED === //
#define LED_NEOPIXEL_NUM 1
#define LED_NEOPIXEL_PIN 9
#define LED_NEOPIXEL_MODE NEO_GRB + NEO_KHZ800
// NEO_KHZ800 800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
// NEO_KHZ400 400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
// NEO_GRB Pixels are wired for GRB bitstream (most NeoPixel products)
// NEO_RGB Pixels are wired for RGB bitstream (v1 FLORA pixels, not v2)
// NEO_RGBW Pixels are wired for RGBW bitstream (NeoPixel RGBW products)
// ===================== DISPLAY CONFIG ==================== // // ===================== DISPLAY CONFIG ==================== //
#define USE_DISPLAY true // default display setting #define USE_DISPLAY true // default display setting
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Adjust the pins to match your setup
Comment out the buttons you don't use.
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = */
#define BUTTON_UP 12 #define BUTTON_UP 12
#define BUTTON_DOWN 13 #define BUTTON_DOWN 13
#define BUTTON_A 14 #define BUTTON_A 14
//#define BUTTON_LEFT 12
//#define BUTTON_RIGHT 13
//#define BUTTON_B 10
/* = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Uncomment the type of display you're using
Only one of them can be defined at a time!
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
0x3c = I2C address
SDA = GPIO 5 (D1)
SCL/SCK = GPIO 4 (D2) */
#define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED #define DEAUTHER_DISPLAY SSD1306Wire display = SSD1306Wire(0x3c, 5, 4); // for 0.96" OLED
//#define DEAUTHER_DISPLAY SH1106Wire display = SH1106Wire(0x3c, 5, 4); // for 1.3" OLED
/* RST = GPIO 5 (D1)
DC = GPIO 4 (D2)
CS = GPIO 15 (D8) or GND
SCK/SCL = GPIO 14 (D5)
SDA/MOSI = GPIO 13 (D7) */
//#define DEAUTHER_DISPLAY SSD1306Spi display = SSD1306Spi display = SSD1306Spi(5, 4, 15); // for 0.96" OLED with SPI
//#define DEAUTHER_DISPLAY SH1106Spi display = SH1106Spi(5, 4, 15); // for 1.3" OLED with SPI
//#define FLIP_DIPLAY // uncomment that to flip the display vertically
// ========================================================= // // ========================================================= //
#endif #endif