This commit adds a reference to the buffer as an argument to
start_frame, and adapts all existing code.
This allows for asynchronous hardware accelerators to skip
copying packet data by referencing it.
It is pointless to try to report the true number because
decode_simple_internal() always treats the buffer as
completely consumed for video codecs anyway.
(Apart from that: The h263dec code would report to only
have consumed the header data in case decoding is aborted
due to skip_frame which makes no sense.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This fixes timeout issues and seems like it was intended
since the line emits an error log.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Marth64 <marth64@proxyid.net>
AVFilmGrainAFGS1Params, the offending struct, is using sizeof(AVFilmGrainParams)
when it should not. This change also forgot to make the necessary changes to the
frame threading sync code.
Both of these will be fixed by the following commit.
H274FilmGrainDatabase will be handled later.
This reverts commit 08b1bffa49.
Signed-off-by: James Almer <jamrial@gmail.com>
Film grain support adds a huge amount of overhead to the H264Context
structure for a feature that is rarely used. On low end devices or
pages that have lots of media this bloats memory usage rapidly.
This changes the static film grain metadata allocations to be dynamic
which reduces the H264Context size from 851808 bytes to 53444 bytes.
Bug: https://crbug.com/359358875
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Niklas Haas <git@haasn.dev>
The earlier code had two problems:
1. For reference frames that are not directly output (happens unless
low_delay is set), the mb skip values referred to the next reference
frame to be decoded.
2. For non-reference frames, every macroblock was always considered
skipped.
This makes the output (worse than) useless; that no one ever
complained about this shows that this feature is not really used.
It is therefore removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Before commit f025b8e110,
every frame-threaded decoder used ThreadFrames, even when
they did not have any inter-frame dependencies at all.
In order to distinguish those decoders that need the AVBuffer
for progress communication from those that do not (to avoid
the allocation for the latter), the former decoders were marked
with the FF_CODEC_CAP_ALLOCATE_PROGRESS internal codec cap.
Yet distinguishing these two can be done in a more natural way:
Don't use ThreadFrames when not needed and split ff_thread_get_buffer()
into a core function that calls the user's get_buffer2 callback
and a wrapper around it that also allocates the progress AVBuffer.
This has been done in 02220b88fc
and since that commit the ALLOCATE_PROGRESS cap was nearly redundant.
The only exception was WebP and VP8. WebP can contain VP8
and uses the VP8 decoder directly (i.e. they share the same
AVCodecContext). Both decoders are frame-threaded and VP8
has inter-frame dependencies (in general, not in valid WebP)
and therefore the ALLOCATE_PROGRESS cap. In order to avoid
allocating progress in case of a frame-threaded WebP decoder
the cap and the check for the cap has been kept in place.
Yet now the VP8 decoder has been switched to use ProgressFrames
and therefore there is just no reason any more for this check
and the cap. This commit therefore removes both.
Also change the value of FF_CODEC_CAP_USES_PROGRESSFRAMES
to leave no gaps.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When starting on a SEI recovery point close enough to the end of
the stream that draining starts before the recovery point's frame
is output, there can be non-recovered frames in the delayed picture
buffer that would currently cause the decoder to fail to output a
frame. This commit skips such frames and outputs the first recovered
frame, if there exists one.
Signed-off-by: arch1t3cht <arch1t3cht@gmail.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
When decoding starts at a SEI recovery point very shortly before the
end of the video stream, there can be frames which are decoded before
the recovery point's frame is output and which will only be output once
the draining has started. Previously, these frames would never be set
as recovered. This commit copies the logic from h264_select_output_frame
to send_next_delayed_frame to properly mark such frames as recovered.
Fixes ticket #10936.
Signed-off-by: arch1t3cht <arch1t3cht@gmail.com>
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The implementation is based on:
https://learn.microsoft.com/en-us/windows/win32/medfound/direct3d-12-video-overview
With the Direct3D 12 video decoding support, we can render or process
the decoded images by the pixel shaders or compute shaders directly
without the extra copy overhead, which is beneficial especially if you
are trying to render or post-process a 4K or 8K video.
The command below is how to enable d3d12va:
ffmpeg -hwaccel d3d12va -i input.mp4 output.mp4
Signed-off-by: Wu Jianhua <toqsxw@outlook.com>
Signed-off-by: Tong Wu <tong1.wu@intel.com>
It involves less allocations and therefore has the nice property
that deriving a reference from a reference can't fail.
This allows for considerable simplifications in
ff_h264_(ref|replace)_picture().
Switching to the RefStruct API also allows to make H264Picture
smaller, because some AVBufferRef* pointers could be removed
without replacement.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unnecessary since the removal of non-thread-safe callbacks
in e0786a8eeb. Since then, the
AVCodecContext has only been used as logcontext.
Removing ff_thread_release_buffer() allowed to remove AVCodecContext*
parameters from several other functions (not only unref functions,
but also e.g. ff_h264_ref_picture() which calls ff_h264_unref_picture()
on error).
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When using multi-threaded decoding, every decoding thread
has its own DBP consisting of H264Pictures and each of these
points to its own AVFrames. They are synced during
update_thread_context via av_frame_ref() and therefore
the threads actually decoding (as well as all the others)
must not modify any field that is copied by av_frame_ref()
after ff_thread_finish_setup().
Yet this is exactly what happens when an error occurs
during decoding and the AVFrame's decode_error_flags are updated.
Given that these errors only become apparent during decoding,
this can't be set before ff_thread_finish_setup() without
defeating the point of frame-threading; in practice,
this meant that the decoder did not set these flags correctly
in case frame-threading was in use. (This means that e.g.
the ffmpeg cli tool fails to output its "corrupt decoded frame"
message in a nondeterministic fashion.)
This commit fixes this by adding a new H264Picture field
that is actually propagated across threads; the field
is an AVBufferRef* whose data is an atomic_int; it is
atomic in order to allow multiple threads to update it
concurrently and not to provide synchronization
between the threads setting the field and the thread
ultimately returning the AVFrame.
This unfortunately has the overhead of one allocation
per H264Picture (both the original one as well as
creating a reference to an existing one), even in case
of no errors. In order to mitigate this, an AVBufferPool
has been used and only if frame-threading is actually
in use. This expense will be removed as soon as
a proper API for refcounted objects (not based upon
AVBuffer) is in place.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add a pointer parameter that if supplied will be used to return
the updated decode_error_flags. This will allow to fix several
races when using frame-threading; these resulted from AVFrame
that the earlier code updated concurrently being used as source
in an av_frame_ref() call in the decoder's update_thread_context.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit is the AVHWAccel analogue of commit
20f9727018: It moves the private fields
of AVHWAccel to a new struct FFHWAccel extending AVHWAccel
in an internal header (namely hwaccel_internal.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For encoding, this field is entirely redundant with
AVCodecContext.framerate.
For decoding, this field is entirely redundant with
AV_CODEC_PROP_FIELDS.
It reduces typing: Before this patch, there were 11 callbacks
that exceeded the 80 char line length limit; now there are zero.
It also allows to remove ONLY_IF_THREADS_ENABLED() in
libavutil/internal.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
and remove FF_CODEC_CAP_INIT_THREADSAFE
All our native codecs are already init-threadsafe
(only wrappers for external libraries and hwaccels
are typically not marked as init-threadsafe yet),
so it is only natural for this to also be the default state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This increases type-safety by avoiding conversions from/through void*.
It also avoids the boilerplate "AVFrame *frame = data;" line
for non-subtitle decoders.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Since 7be2d2a70c only one context
is used. Moving it to H264Context from H264SliceContext is natural.
One could access the ERContext from H264SliceContext
via H264SliceContext.h264->er; yet H264SliceContext.h264 should
naturally be const-qualified, because slice threads should not
modify the main context. The ERContext is an exception
to this, as ff_er_add_slice() is intended to be called simultaneously
by multiple threads. And for this one needs a pointer whose
pointed-to-type is not const-qualified.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
The majority of frame-threaded decoders (mainly the intra-only)
need exactly one part of ThreadFrame: The AVFrame. They don't
need the owners nor the progress, yet they had to use it because
ff_thread_(get|release)_buffer() requires it.
This commit changes this and makes these functions work with ordinary
AVFrames; the decoders that need the extra fields for progress
use ff_thread_(get|release)_ext_buffer() which work exactly
as ff_thread_(get|release)_buffer() used to do.
This also avoids some unnecessary allocations of progress AVBuffers,
namely for H.264 and HEVC film grain frames: These frames are not
used for synchronization and therefore don't need a ThreadFrame.
Also move the ThreadFrame structure as well as ff_thread_ref_frame()
to threadframe.h, the header for frame-threaded decoders with
inter-frame dependencies.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation for further commits that will stop
using ThreadFrame for frame-threaded codecs that don't use
ff_thread_(await|report)_progress(); the API for those codecs
having inter-frame depdendencies will live in threadframe.h.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
