We need to allocate space for 64 coefficients per block;
24dbc4c2e8 wanted to
perform the calculation 64*sizeof(MJpegHuffmanCode)
at compile time, yet in the end did it in a way that
made it allocate 64 times as much memory as needed.
Reported-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Many of the fields of MpegEncContext (which is also used by decoders)
are actually only used by encoders. Therefore this commit adds
a new encoder-only structure and moves all of the encoder-only
fields to it except for those which require more explicit
synchronisation between the main slice context and the other
slice contexts. This synchronisation is currently mainly provided
by ff_update_thread_context() which simply copies most of
the main slice context over the other slice contexts. Fields
which are moved to the new MPVEncContext no longer participate
in this (which is desired, because it is horrible and for the
fields b) below wasteful) which means that some fields can only
be moved when explicit synchronisation code is added in later commits.
More explicitly, this commit moves the following fields:
a) Fields not copied by ff_update_duplicate_context():
dct_error_sum and dct_count; the former does not need synchronisation,
the latter is synchronised in merge_context_after_encode().
b) Fields which do not change after initialisation (these fields
could also be put into MPVMainEncContext at the cost of
an indirection to access them): lambda_table, adaptive_quant,
{luma,chroma}_elim_threshold, new_pic, fdsp, mpvencdsp, pdsp,
{p,b_forw,b_back,b_bidir_forw,b_bidir_back,b_direct,b_field}_mv_table,
[pb]_field_select_table, mb_{type,var,mean}, mc_mb_var, {min,max}_qcoeff,
{inter,intra}_quant_bias, ac_esc_length, the *_vlc_length fields,
the q_{intra,inter,chroma_intra}_matrix{,16}, dct_offset, mb_info,
mjpeg_ctx, rtp_mode, rtp_payload_size, encode_mb, all function
pointers, mpv_flags, quantizer_noise_shaping,
frame_reconstruction_bitfield, error_rate and intra_penalty.
c) Fields which are already (re)set explicitly: The PutBitContexts
pb, tex_pb, pb2; dquant, skipdct, encoding_error, the statistics
fields {mv,i_tex,p_tex,misc,last}_bits and i_count; last_mv_dir,
esc_pos (reset when writing the header).
d) Fields which are only used by encoders not supporting slice
threading for which synchronisation doesn't matter: esc3_level_length
and the remaining mb_info fields.
e) coded_score: This field is only really used when FF_MPV_FLAG_CBP_RD
is set (which implies trellis) and even then it is only used for
non-intra blocks. For these blocks dct_quantize_trellis_c() either
sets coded_score[n] or returns a last_non_zero value of -1
in which case coded_score will be reset in encode_mb_internal().
Therefore no old values are ever used.
The MotionEstContext has not been moved yet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It gets rid of a switch (with accompanying CONFIG_*_ENCODER checks);
for MJPEG, it even lets one perform the check for whether one is
really encoding or only recording the macroblock once during init.
Furthermore, the switch actually contained lots of dead code --
it is compiled three times (for different pixel formats: 420, 422, 444),
yet most encoders only support 420. The approach used here automatically
fixes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The header is always written by the main thread, so it is
not surprising that header_bits can be moved to MPVMainEncContext
as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reuse the already computed value of macroblocks; use an array
instead of a switch, evaluate 64 * sizeof(MJpegHuffmanCode)
at compile-time.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Right now, ff_mpv_encode_init() is set as FFCodec.init and
calls ff_speedhq_encode_init(). The opposite is more natural,
avoids a non-static function and allows to reuse e.g.
slice_context_count instead of duplicating the logic from
ff_mpv_common_init().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation for moving all the elements from
MpegEncContext that are only used by the main encoder thread
to MPVMainEncContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has been deconstified in 2c2dfd9149
because the FFCodec is touched in av_codec_init_static because
of its get_supported_config callback. Yet this is easily remedied:
Only call get_supported_config to set pix_fmts if the codec does
not already have it set.
This also fixes a mismatch between the declaration of ff_mjpeg_encoder
in allcodecs.c and the definition in mjpegenc.c. Said mismatch is
actually undefined behaviour.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The aim of this is twofold: a) Clang warns when setting a deprecated
field in a definition and because several of the widely set
AVCodec fields are deprecated, one gets several hundred warnings
from Clang for an ordinary build. Yet fortunately Clang (unlike GCC)
allows to disable deprecation warnings inside a definition, so
that one can create simple macros to set these fields that also suppress
deprecation warnings for Clang. This has already been done in
fdff1b9cbf for AVCodec.channel_layouts.
b) Using macros will allow to easily migrate these fields to internal ones.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Said parent is shared between all slice contexts and encode_block()
can be run concurrently by slice threads, so the parent context
must not be (and is not) modified. So constify the pointers.
Reviewed-by: Ramiro Polla <ramiro.polla@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Both these options are unsupported and silently ignored for AMV;
so it is better to not offer them at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The mpegvideo-based encoders do one uncommon thing with
the packet's data given by ff_alloc_packet(): They potentially
reallocate it. But this only affects the internal buffer
and is not user-facing at all, so one can nevertheless
use the AV_CODEC_CAP_DR1 for them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This codec's capabilities should be set dynamically based on the value
of strict_std_compliance, when available. This will allow us to finally
get rid of the strictness hack in ffmpeg_filter.c.
I went through all codecs and put them into five basic categories:
1. JPEG range only
2. MPEG range only
3. Explicitly tagged
4. Broken (codec supports both but encoder ignores tags)
5. N/A (headerless or pseudo-formats)
Filters in category 5 remain untouched. The rest gain an explicit
assignment of their supported color ranges, with codecs in category
4 being set to MPEG-only for safety.
It might be considered redundant to distinguish between 0 (category 5)
and MPEG+JPEG (category 3), but in doing so we effectively communicate
that we can guarantee that these tags will be encoded, which is distinct
from the situation where there are some codecs that simply don't have
tagging or implied semantics (e.g. rawvideo).
A full list of codecs follows:
JPEG range only:
- amv
- roqvideo
MPEG range only:
- asv1, asv2
- avui
- cfhd
- cljr
- dnxhd
- dvvideo
- ffv1
- flv
- h261, h263, h263p
- {h263,vp8}_v4l2m2m
- huffyuv, ffvhuff
- jpeg2000
- libopenjpeg
- libtheora
- libwebp, libwebp_anim
- libx262
- libxavs, libxavs2
- libxvid
- mpeg1video, mpeg2video
- mpeg2_qsv
- mpeg2_vaapi
- mpeg4, msmpeg4, msmpeg4v2, wmv1, wmv2
- mpeg4_omx
- prores, prores_aw, prores_ks
- rv10, rv20
- snow
- speedhq
- svq1
- tiff
- utvideo
Explicitly tagged (MPEG/JPEG):
- {av1,h264,hevc}_nvenc
- {av1,h264,hevc}_vaapi
- {av1,h264,hevc,vp8,vp9,mpeg4}_mediacodec
- {av1,h264,hevc,vp9}_qsv
- h264_amf
- {h264,hevc,prores}_videotoolbox
- libaom-av1
- libkvazaar
- libopenh264
- librav1e
- libsvtav1
- libvpx, libvpx-vp9
- libx264
- libx265
- ljpeg
- mjpeg
- vc2
Broken (encoder ignores tags):
- {av1,hevc}_amf
- {h264,hevc,mpeg4}_v4l2m2m
- h264_omx
- libxeve
- magicyuv
- {vp8,vp9,mjpeg}_vaapi
N/A:
- ayuv, yuv4, y41p, v308, v210, v410, v408 (headerless)
- pgmyuv (headerless)
- rawvideo, bitpacked (headerless)
- vnull, wrapped_avframe (pseudocodecs)
Up until now, an initialized MpegEncContext had an array of
MPVPictures (way more than were ever needed) and the MPVPicture*
contained in the MPVWorkPictures as well as the input_picture
and reordered_input_picture arrays (for the encoder) pointed
into this array. Several of the pointers could point to the
same slot and because there was no reference counting involved,
one had to check for aliasing before unreferencing.
Furthermore, given that these pointers were not ownership pointers
the pointers were often simply reset without unreferencing
the slot (happened e.g. for the RV30 and RV40 decoders) or
there were moved without resetting the src pointer (happened
for the encoders where the entries in the input_picture
and reordered_input_picture arrays were not reset).
Instead actually releasing these pictures was performed by looping
over the whole array and checking which one of the entries needed
to be kept. Given that the array had way too many slots (36),
this meant that more than 30 MPVPictures have been unnecessarily
unreferenced in every ff_mpv_frame_start(); something similar
happened for the encoder.
This commit changes this by making the MPVPictures refcounted
via the RefStruct API. The MPVPictures itself are part of a pool
so that this does not entail constant allocations; instead,
the amount of allocations actually goes down, because the
earlier code used such a large array of MPVPictures (36 entries) and
allocated an AVFrame for every one of these on every
ff_mpv_common_init(). In fact, the pool is only freed when closing
the codec, so that reinitializations don't lead to new allocations
(this avoids having to sync the pool in update_thread_context).
Making MPVPictures refcounted also has another key benefit:
It makes it possible to directly share them across threads
(when using frame-threaded decoding), eliminating ugly code
with underlying av_frame_ref()'s; sharing these pictures
can't fail any more.
The pool is allocated in ff_mpv_decode_init() for decoders,
which therefore can fail now. This and the fact that the pool
is not unreferenced in ff_mpv_common_end() also necessitated
to mark several mpegvideo-decoders with the FF_CODEC_CAP_INIT_CLEANUP
flag.
*: This also means that there is no good reason any more for
ff_mpv_common_frame_size_change() to exist.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Makes it robust against adding fields before it, which will be useful in
following commits.
Majority of the patch generated by the following Coccinelle script:
@@
typedef AVOption;
identifier arr_name;
initializer list il;
initializer list[8] il1;
expression tail;
@@
AVOption arr_name[] = { il, { il1,
- tail
+ .unit = tail
}, ... };
with some manual changes, as the script:
* has trouble with options defined inside macros
* sometimes does not handle options under an #else branch
* sometimes swallows whitespace
Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Codecs that can read/write ICC profiles deserve a special capability so
the common logic in encode.c/decode.c can decide whether or not there
needs to be any special handling for ICC profiles. The motivation here
is to be able to use it to decide whether or not an ICC profile needs to
be generated in the encode path, but it might as well get added to
decoders as well for purely informative reasons.
It's not entirely clear to me whether the "thp" and "smvjpeg" variants
of "mjpeg" should have this capability set or not, given that the code
technically supports it but I somehow doubt these files may contain
them. In either case, this cap is purely informative for decoders so it
doesn't matter too much either way.
It's also not entirely clear whether the "amv" encoder should signal ICC
profile support, but again erring on the side of caution, we probably
*shouldn't* be generating (and encoding!) ICC profiles for this type of
media file.
Signed-off-by: Niklas Haas <git@haasn.dev>
and remove FF_CODEC_CAP_INIT_THREADSAFE
All our native codecs are already init-threadsafe
(only wrappers for external libraries and hwaccels
are typically not marked as init-threadsafe yet),
so it is only natural for this to also be the default state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit removes the ineffective FF_MPV_DEPRECATED_ options,
namely mpeg_quant (this is only an option for MPEG-4), a53cc
(this is only an option for MPEG-2), force_duplicated_matrix
(applies only to MJPEG) and b_strategy, b_sensitivity and brd_scale
(these options only make sense for encoders supporting B-frames,
which currently means the MPEG-1/2 and MPEG-4 encoders).
Given that these options never changed the outcome of encoding,
they are removed at once.
Notice that the options for the encoders for which it made sense
are not affected by this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The size of the ICC chunk has already been accounted for when
the packet's buffer was initially set in ff_mpv_encode_picture()
and the header (including the ICC chunk) has already been written
at this point.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is mostly straightforward. The major complication is that, as a
result of the 16-bit chunk size limitation, ICC profiles may need to be
split up into multiple chunks.
We also need to make sure to allocate enough extra space in the packet
to fit the ICC profile, so modify both mpegvideo_enc.c and ljpegenc.c to
take into account this extra overhead, failing cleanly if necessary.
Also add a FATE transcode test to ensure that the ICC profile gets
written (and read) correctly. Note that this ICC profile is smaller than
64 kB, so this doesn't test the APP2 chunk re-arranging code at all.
Signed-off-by: Niklas Haas <git@haasn.dev>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In the aforementioned case mpegvideo_enc.c calls
ff_mjpeg_encode_stuffing() at the end of every line which
pads the output to byte-alignment and escapes it;
yet it does not write the restart-markers (and also not
the DRI marker when writing the header) and so the output files
are broken.
Fix this by writing these markers depending upon the number of
slices and not the number of threads in use; this also makes
the output of the encoder reproducible given a slice count
and is therefore important if encoder tests that actually use
-threads auto are added in the future.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Our code for writing optimal huffman tables is incompatible
with using multiple slices and hence commit
884506dfe2 that implemented this
also added an assert that slice_context_count is always 1.
Yet this was always wrong: a) The MJPEG-encoder has (and had)
the AV_CODEC_CAP_SLICE_THREADS capability, so asserting that
it always uses one slice context is incorrect.
b) This commit did not add any proper checks that ensured that
optimal huffman tables are never used together with multiple slices.
This only happened with 03eb0515c1.
c) This assert is at the wrong place: ff_mjpeg_encode_init() is
called before the actual slice_context_count is set. This is
the reason why this assert was never triggered.
Therefore this commit removes this assert.
Also remove an assert from the SpeedHQ encoder sharing b) and c).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is possible now that MJpegContext is allocated jointly
with MpegEncContext as part of the AVCodecContext's private data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This factors the translation from MpegEncContext out
and will enable further optimizations in the next commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, ff_mpv_encode_end() is the close function of
the two MJPEG-based encoders; it calls ff_mjpeg_encode_close()
for them which adds a check to the generic code.
This commit reverses the order of this relationship:
The MJPEG encoders directly use a custom close function
which in turn calls ff_mpv_encode_end(). This avoids the branch
in ff_mpv_encode_end() and makes the generic code more generic.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
